Jump to navigation Jump to search

PVD 75 Proline

458 bytes removed, 4 months ago
{{infobox equipment
|restriction = [[{{PAGENAME}}#Material_Restrictions|Semi-Clean]]
|materials = [[Aluminum|Al]], [[Al2O3|Al<sub>2</sub>O<sub>3</sub>]], [[Chromium|Cr]], [[Copper|Cu]],[[Cobalt|Co]],[[Iron|Fe]], [[Nickel|Ni]],[[Molybdenum|Mo]], [[Silicon|Si]], [[Silicon Dioxide|SiO<sub>2</sub>]], [[Silicon Nitride|Si<sub>3</sub>N<sub>4</sub>]], [[Silver|Ag]],[[Titanium|Ti]],[[Tungsten|W]]
|mask =
|size = 150mm x 4mm and smaller samples
<!-- *Update this with announcements as necessary -->
*The target change process on this tool is a user supported process[https://docs. That can be completed during the tool reservation when the chamber is vented to load| LNF Sputter Calendar]
In addition to these, this tool has a number of user-supported recipes for depositing a wide variety of materials. Some of these recipes are documented on User Processes.
If you have a material deposition need that is not listed, check to see if this material is deposited on another PVD tool or see more about options for running your own private material on the [[LNF PVD Films|LNF PVD Films]] page. The PVD 75 Proline is the preferred sputtering tool for non-standard materials. See how to [ Request New PVD Films] here. See more on how to request new sputter sources specifically on the [ LNF Sputter Adding New Films] page.
===Process Name===
|500Å / 3000Å
|Chrome Chromium ([[ChromeChromium|Cr]])
|3000Å / 9000Å
| 5000Å / NA
|Iron ([[Iron|IrFe]])
|2000Å / 6000Å
==Standard Operating Procedure==
<!-- To include a document from google docs, use the line below, replace "googledocid" with the ID for the document. Remember, to make this visible, you must set Sharing for the document to "Anyone with the link can view". -->
==Checkout Procedure==
The PVD 75 is on the [[LNF Scheduler]]. LNF constituents may reserve time on the tool, and even request staff support for process development.
For more details, see [[KJLC Sputter Tool Access and Training]].
<!-- This is an example a chart published with etch data. You can just replace the url with your own. --> #Complete the following items#*Read the Standard Operating Procedure above#*Review all of the Wiki pages associated with this tool#*online [| PVD 75 Tool VerificationRise Training](this only needs to completed once so if you are authorized on another PVD tool or sputter tool, you do not need to do it again.)#*[https://docs.googleRead through this Wiki page and the Operating Procedure| PVD 75 User Detailed Procedure]#*Create a [https| PVD 75 User Training Quiz]<!--==#*<iframe src="https:edu/sselScheduler/" frameborder="0" width="480" height="299" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe>==--><!--:0:0:{{# Complete the training request form [<link> herevar:toolid}} Helpdesk Ticket]. -->#Create a helpdesk ticket requesting training.#A tool engineer or user services member will schedule contact you for a time for initial trainingsession.#Practice with your mentor or another authorized user until you are comfortable with tool operation.<!--# Complete the SOP quiz [<link> here| PVD 75 User Training Quiz]. -->#Schedule a checkout session with a tool engineer via the helpdesk ticket system. If this checkout is successful, the engineer will authorize you on the toolat the "user" level<!--==Tool Qualification== --><!-- Describe standard maintenance/qualification tests here -->
For more details, see [[{{BASEPAGENAME}}/Maintenance and qualification]].
LabUser, OnlineAccess, PhysicalAccess, Staff, StoreUser


Navigation menu