Jump to navigation Jump to search


150 bytes added, 2 years ago
{{warning|This page has not been released yet.}}
{{#vardefine:restriction|0}} <!-- Set the Material Restriction Level: 1 = CMOS Clean, 2 = Semi-Clean, 3 = Metals, 4 = varies -->
{{Infobox material
|image =
|caption =
|category =
|properties =
|names =
Aluminum is a metal that is a silvery-white, soft, non-magnetic and ductile in the boron group.
==Applications==*Discuss common uses/applications for this material. Why this materials is used in the LNF? ==Processing ToolsEquipment==
Process technologies that can be used to deposit/pattern this material. If this is a substrate, refer to what tool/process restrictions there may be and possibly remove the following sub-sections.
===Deposition Equipment===
*[[Lab 18-2]]
*[[Acid Bench 12]] - maintained tank
*[[Acid Bench 73]] - Beaker
*[[Acid Bench 8280]] - Beaker*[[LAM 9400]] ===Characterization Equipment===*[[Dektak XT]] ==Applications==*Aluminum is a commonly deposited metal in the lab. It has a high reflectivity for optical devices.
===Depositoin Processes===*[[Electron_beam_evaporation|E-beam evaporation]]========*[[Sputter_deposition|Sputter deposition]]==== 
===Etch Processes===
====*[[Wet etching|Wet etching]]====**Wet etching can be used to etch aluminum using [[Aluminum Etch]]**at [[Acid Bench 12]]**, [[Acid Bench 73]], and [[ Acid Bench 80]]. *[[Reactive ion etching]] ===Characterization Processes===*The profilometer can be used to measure the thickness of your deposition.
*'''Etch rates for micromachining processing'''
*'''Etch rates for micromachining processing-Part II'''
OnlineAccess, PhysicalAccess, Staff, StoreManager, StoreUser


Navigation menu