Changes

Jump to navigation Jump to search

Aluminum

71 bytes added, 2 years ago
{{warning|This page has not been released yet.}}
{{#vardefine:restriction|0}} <!-- Set the Material Restriction Level: 1 = CMOS Clean, 2 = Semi-Clean, 3 = Metals, 4 = varies -->
{{Infobox material
|image =
|caption =
|category =
|properties =
|names =
}}
 
Aluminum is a metal that is a silvery-white, soft, non-magnetic and ductile in the boron group.
==Applications==
*Discuss common uses/applications for this material. Why this materials is used in the LNF?
 
==Processing Equipment==
Process technologies that can be used to deposit/pattern this material. If this is a substrate, refer to what tool/process restrictions there may be and possibly remove the following sub-sections.
 
===Deposition Equipment===
*[[Lab 18-2]]
*[[Acid Bench 80]] - Beaker
*[[LAM 9400]]
 
===Characterization Equipment===
*[[Dektak XT]]
 
==Applications==
*Aluminum is a commonly deposited metal in the lab. It has a high reflectivity for optical devices.
 
==Processes==
===Depositoin Processes===
**Wet etching can be used to etch aluminum using [[Aluminum Etch]] at [[Acid Bench 12]], [[Acid Bench 73]], and [[ Acid Bench 80]].
*[[Reactive ion etching]]
 
===Characterization Processes===
*The profilometer can be used to measure the thickness of your deposition.
==References==
*'''Etch rates for micromachining processing''' https://ieeexplore.ieee.org/abstract/document/546406
*'''Etch rates for micromachining processing-Part II''' https://ieeexplore.ieee.org/abstract/document/1257354
OnlineAccess, PhysicalAccess, Staff, StoreManager, StoreUser
1,064

edits

Navigation menu