Difference between revisions of "ACS 200 cluster tool"

From LNF Wiki
Jump to navigation Jump to search
Line 34: Line 34:
 
==System overview==
 
==System overview==
 
===Hardware details===
 
===Hardware details===
* Gases
+
* RC-8 spin coater with gyrset closed cover option
* Pressure
+
* 4" chuck will accomodate 6"
* Chuck
+
* spr 220(3.0) and 1813 photo resists automatically dispensed.
* Chamber
+
* Other resists can be coated with EFD dipense option.
 +
* Spray develop module fitted with MF300 and MF319
 +
* Hot plate ovens and HMDS vapor prime chamber
 +
* Fully automated robot handling
 
* Chemicals
 
* Chemicals
  
 
===Substrate requirements===
 
===Substrate requirements===
* Wafer Size
+
* 4" and 6" wafers
* Wafer type
+
* glass wafers not preferred for baking
* Any mounting?
 
* Wafer thickness
 
  
 
===Material restrictions===
 
===Material restrictions===

Revision as of 13:33, 21 August 2015

ACS 200 cluster tool
54040.jpg
Equipment Details
Technology Lithography spin coating/developing
Materials Restriction Metals
Equipment Manual
Overview System Overview
Operating Procedure SOP
Supported Processes Supported Processes
User Processes User Processes
Maintenance Maintenance


Warning Warning: This page has not been released yet.


Announcements

  • Update this with announcements as necessary

Capabilities

  • Automated spin coating
  • Automated spray developing
  • 4" and 6" wafers

System overview

Hardware details

  • RC-8 spin coater with gyrset closed cover option
  • 4" chuck will accomodate 6"
  • spr 220(3.0) and 1813 photo resists automatically dispensed.
  • Other resists can be coated with EFD dipense option.
  • Spray develop module fitted with MF300 and MF319
  • Hot plate ovens and HMDS vapor prime chamber
  • Fully automated robot handling
  • Chemicals

Substrate requirements

  • 4" and 6" wafers
  • glass wafers not preferred for baking

Material restrictions

The ACS 200 cluster tool is designated as a Metals class tool. Below is a list of approved materials for the tool. Approved means the material is allowed in the tool under normal circumstances. If a material is not listed, please create a helpdesk ticket or email info@lnf.umich.edu for any material requests or questions.


Supported processes

There are several processes for this tool supported by the LNF, which are described in more detail on the Processes page.

In addition to these, this tool has a number of user-created recipes for etching a wide variety of materials. Some of these recipes are documented on ACS 200 cluster tool user processes. If you are curious if your material can be processed in this tool, please contact the tool engineers via the helpdesk ticket system.

Standard operating procedure

Widget text will go here.

Checkout procedure

  1. Read through this page and the Standard Operating Procedure above.
  2. Complete the training request form here.
  3. Create a Helpdesk Ticket requesting training.
  4. A tool engineer will schedule a time for initial training.
  5. Practice with your mentor or another authorized user until you are comfortable with tool operation.
  6. Complete the SOP quiz here.
  7. Schedule a checkout session with a tool engineer via the helpdesk ticket system. If this checkout is successful, the engineer will authorize you on the tool.

Maintenance

Process name