|Warning:||This page has not been released yet.|
Aluminum is a metal that is a silvery-white, soft, non-magnetic and ductile in the boron group.
- Discuss common uses/applications for this material. Why this materials is used in the LNF?
Process technologies that can be used to deposit/pattern this material. If this is a substrate, refer to what tool/process restrictions there may be and possibly remove the following sub-sections.
Wet etching can be used to etch aluminum using Aluminum Etch
- Etch rates for micromachining processing https://ieeexplore.ieee.org/abstract/document/546406
- Etch rates for micromachining processing-Part II https://ieeexplore.ieee.org/abstract/document/1257354