Base Bench 91
|Base Bench 91|
|Sample Size||up to 6" wafer|
|Chemicals Used||KOH, TMAH, bases|
|Supported Processes||Supported Processes|
|User Processes||User Processes|
|Warning:||This page has not been released yet.|
Base Bench 91 is a wet bench used for processing with bases. A number of processes (KOH and TMAH etching, photoresist development, etc) are supported for this bench. It is a metals class bench with few materials restrictions, so can be used for a wide variety of basic chemical processing on a wide variety of materials.
- Update this with announcements as necessary
This bench is used for general basic wet chemical processing. LNF supported processes are:
- KOH anisotropic etc (non CMOS)
- TMAH Si etch (both CMOS and non CMOS)
- Photoresist development
- III-V oxide etch
This bench is mostly used for KOH and TMAH si etch. KOH is a non-CMOS process and TMAH is a CMOS process. We also have the capability to do TMAH etch on non-CMOS wafers. This bench also supports the photoresist development done in the ROBIN lab as well as other chemical processes like III-V oxide etch.
- Chemicals supplied: KOH and TMAH
- Hot plate for TMAH processing
- Heated Quartz bath for KOH etch
- Hot plate available for other processes
- HF bath for native oxide removal prior to Si etch
- Aspirator to neutralization system
- Nitrogen and DI gun
- Wafer Size 4" and 6"
The Base Bench 91 is designated as a Metals class tool. Below is a list of approved materials for the tool. Approved means the material is allowed in the tool under normal circumstances. If a material is not listed, please create a helpdesk ticket or email email@example.com for any material requests or questions.
There are several processes for this tool supported by the LNF, which are described in more detail on the Processes page.
In addition to these, this tool has a number of user-created recipes for etching a wide variety of materials. Some of these recipes are documented on Base Bench 91 user processes. If you are curious if your material can be processed in this tool, please contact the tool engineers via the helpdesk ticket system.
Standard operating procedure
Widget text will go here.
- Read through this page and the Standard Operating Procedure above.
- Complete the training request form here.
- Create a Helpdesk Ticket requesting training.
- A tool engineer will schedule a time for initial training.
- Practice with your mentor or another authorized user until you are comfortable with tool operation.
- Complete the SOP quiz here.
- Schedule a checkout session with a tool engineer via the helpdesk ticket system. If this checkout is successful, the engineer will authorize you on the tool.