The LNF is a micro and nanofabrication facility. This lab excels at combining technologies and materials within a single device, for example, optical or mechanical sensors with integrated processing circuitry and on board power generation. Silicon is the most common substrate material as it is relatively inexpensive, has a wide variety of useful properties, and is easy to machine. III-V compound semiconductors also have a long history at the LNF, and substrates consisting of other materials with unique properties are becoming more common. Most of our hardware can handle small pieces up to 150mm round substrates.
- 1 Technologies
- 2 Equipment
- 3 Materials
Below are links to the main groups of technologies available at the LNF.
Deposition or growth
There are many different types of deposition techniques depending on the material to be deposited, its thickness, the substrate on which it needs to be processed and other parameters. Please see below for several links to the specific deposition technologies supported at the LNF.
- Chemical vapor deposition (CVD)
- Electroplating or electrochemical deposition
Lithography, direct write and mask making
The fabrication of devices and structures require patterning, typically through optical lithography or electron-beam lithography, depending on the dimensions needed. Photomasks fabrication is also supported at the LNF. In addition, several technologies for direct writing such as inkjet printing and dip-pen nanolithography are available and a dedicated area is used for soft lithography and SU-8/PDMS processing. Nanoimprinting equipment is also in place in the LNF, but requires special arrangements for access and training as it is currently owned and managed by an individual research group. Please see below for several links to the specific deposition technologies supported at the LNF.
- Optical lithography, including both contact and projection lithography
- Electron-beam lithography
- Soft lithography and SU-8/PDMS processing
- Mask making
- Direct writing
- Other general lithography technologies including coating and developing
Both dry and wet etching with a wide range of characterizaed processes and recipes are available at the LNF to transfer the desired pattern onto your samples.
- Wet etching
- Reactive ion etching (RIE), including deep RIE
- Other plasma etching and XeF2 etching equipment
Thermal processes include several different technologies from annealing to doping, diffusion or oxidation.
- Annealing, including Rapid Thermal Annealing (RTA) technology
- Thermal oxidation
- Doping and diffusion
- Low pressure chemical vapor deposition (LPCVD)
The LNF offers a wide range of wet processing stations for cleaning, wet etching, lithography support, electroplating and other general wet processing. Material segregation is critical in wet bench processing.
Metrology and characterization
Many different technologies are available at the LNF for metrology and characterization of films and structures, such as Atomic force microscopy (AFM), Scanning electron miroscopy (SEM), ellipsometry, mechanical and optical profilometry, reflectometry, mechanical stress measurement. In addition, the LNF offers a wide range of optical microscopes including special features such as confocal, fluorescent, infra-red. For more information on these and other measurement and characterization capabilities, please see the metrology page.
Packaging and mechanical finishing
Packaging technologies are well presented at the LNF, and many additional capabilities are also available for mechanical finishing and back end of the line technologies.
In addition, there are several other technologies that do not necessarily fall under any of the groups listed above.
Equipment in the LNF is organized by technology. If you know the specific piece of equipment you are looking for, you can search for it, browse the different equipment categories below, or see a complete list of interlocked equipment here.
Below is a brief list of the materials that are commonly used in the LNF.
If you are interested in using a material that is not listed here, please create a Helpdesk ticket or contact the LNF user services group directly via LNFfirstname.lastname@example.org.