Difference between revisions of "Deposition"

From LNF Wiki
Jump to navigation Jump to search
Line 29: Line 29:
===Thermal budget===
===Thermal budget===
===Wet etch rate (WER)===
[[Category:Etching| ]]
[[Category:Etching| ]]

Revision as of 16:07, 22 September 2015

Deposition is any process that grows, coats, or otherwise transfers a material onto the substrate.


Typical technologies include physical vapor deposition (PVD), chemical vapor deposition (CVD), electrodeposition/ electroplating or electrochemical deposition (ECD), and atomic layer deposition (ALD).

Physical vapor deposition (PVD)

Physical vapor deposition (PVD) describes a variety of vacuum deposition methods used to deposit thin films by the condensation of a vaporized form of the desired film material onto various substrates.

Chemical vapor deposition (CVD)

Chemical vapor deposition (CVD) consists of the substrate being exposed to one or more volatile precursors, which react and/or decompose on the substrate surface to produce the desired deposit. There are many methods for enhancing the chemical reaction rates of the precursors.

Electrodeposition/ Electroplating/ Electrochemical deposition (ECD)


Atomic layer deposition (ALD)

Atomic Layer Deposition (ALD) at the LNF is performed on the Oxford OpAL ALD system that currently offers three films Alumina/Aluminum Oxide (Al2O3), Hafnia/Hafnium Oxide (HfO2), and Zinc Oxide (ZnO).

Figures of merit

Deposition rate

Refractive index


Thermal budget

Wet etch rate (WER)