Difference between revisions of "Gold"

From LNF Wiki
Jump to navigation Jump to search
Line 14: Line 14:
  
 
==Processing Equipment==
 
==Processing Equipment==
Process technologies that can be used to deposit/pattern this material.  If this is a substrate, refer to what tool/process restrictions there may be and possibly remove the following sub-sections.
 
 
==Applications==
 
Discuss common uses/applications for this material.
 
 
===Deposition Equipment===
 
===Deposition Equipment===
 
*[[Lab 18-2]]
 
*[[Lab 18-2]]
Line 31: Line 27:
 
*[[Plasmatherm 790]]
 
*[[Plasmatherm 790]]
 
*[[STS Glass Etcher]]
 
*[[STS Glass Etcher]]
 
+
==Applications==
* List of equipment for processing this material
+
Discuss common uses/applications for this material.
  
 
==Processes==
 
==Processes==
Line 41: Line 37:
  
 
===Etch Processes===
 
===Etch Processes===
====[[Wet etching]]====
+
*[[Wet etching]]
*Wet etching is done by using Transene [[Gold Etch]] 8111.  Gold etchant 8111 is a cyanide free based etchant that provides strong definition with minimal undercutting.  Gold etchant is potassium iodide and iodine based.  You can get a good estimate of etch gold etch rates through other chemicals from ["Etch rates for micromachining processing"] and ["Etch rates for micromachining processing-Part II"]
+
**Wet etching is done by using Transene [[Gold Etch]] 8111.  Gold etchant 8111 is a cyanide free based etchant that provides strong definition with minimal undercutting.  Gold etchant is potassium iodide and iodine based.  You can get a good estimate of etch gold etch rates through other chemicals from ["Etch rates for micromachining processing"] and ["Etch rates for micromachining processing-Part II"]
  
 
==References==
 
==References==
 
*[http://en.wikipedia.org/wiki/Gold Wikipedia Gold]
 
*[http://en.wikipedia.org/wiki/Gold Wikipedia Gold]

Revision as of 10:06, 8 April 2020

Warning Warning: This page has not been released yet.


Gold
Material Details
Material Restriction Metals



Gold is generally used for conductive layers and occasionally in bonding applications. Due to its high mobility it is not allowed in most semiconductor equipment.

Processing Equipment

Deposition Equipment

Etching Equipment

Applications

Discuss common uses/applications for this material.

Processes

Deposition

Etch Processes

  • Wet etching
    • Wet etching is done by using Transene Gold Etch 8111. Gold etchant 8111 is a cyanide free based etchant that provides strong definition with minimal undercutting. Gold etchant is potassium iodide and iodine based. You can get a good estimate of etch gold etch rates through other chemicals from ["Etch rates for micromachining processing"] and ["Etch rates for micromachining processing-Part II"]

References