Difference between revisions of "LAM 9400/Processes/LNF Poly"
Jump to navigation
Jump to search
| Line 13: | Line 13: | ||
==Etch Rates== | ==Etch Rates== | ||
| − | *Si - 2800 Å/min | + | * Polysilicon - 2340 Å/min (blanket 150mm poly) |
| + | *Si - 2800 Å/min (<10% open area) | ||
*SPR 220 (3.0) - 275 Å/min | *SPR 220 (3.0) - 275 Å/min | ||
*SiO<sub>2</sub> - 150 Å/min | *SiO<sub>2</sub> - 150 Å/min | ||
Revision as of 16:53, 8 February 2016
| About this Process | |
|---|---|
| Process Details | |
| Equipment | LAM 9400 |
| Technology | RIE |
| Material | Poly |
| Mask Materials | PR |
| Gases Used | HBr, He |
| Date Created | 2016 |
LNF_Poly is designed for etching Si and Polysilicon in the LAM 9400. This recipe produces a very vertical sidewall angle and has a high selectively to oxide (~18:1).
Etch Rates
- Polysilicon - 2340 Å/min (blanket 150mm poly)
- Si - 2800 Å/min (<10% open area)
- SPR 220 (3.0) - 275 Å/min
- SiO2 - 150 Å/min
Parameters
| Parameter | Breakthrough | Main Etch |
|---|---|---|
| Time | 10 sec | variable |
| Pressure | 5 mTorr | 30 mTorr |
| TCP Power | 300 W | 600 W |
| Bias Power | 100 W | 90 W |
| Cl2 Flow | 60 sccm | 0 sccm |
| HBr Flow | 0 sccm | 100 sccm |
| He Flow | 0 sccm | 100 sccm |
Sidewall Profile
- Nearly a 90 degree sidewall angle
LNF_Poly for 600 sec, 2 µm grating
LNF_Poly for 600 sec, 10 µm grating
Limitations
This process should not be run below 25 mTorr since the tool has difficulty stabilizing a pure HBr process in that pressure regime.
