LNF PVD Films
Jump to navigation Jump to search
Revision as of 14:06, 7 August 2019 by Mwoonk (talk | contribs) (Created page with "←Back to Lab 18-1''' ←Back to Lab 18-2''' ←Back to PVD 75''' ←Enerjet Evaporator|Back to Enerjet Evaporat...")
- 1 PVD Materials Supported for General Use
- 2 Requesting New Materials
- 3 Support
PVD Materials Supported for General Use
These are the PVD films currently supported in the LNF with maximum thicknesses listed.
Requesting New Materials
If you do not see the film you need
- Unless there is a specific need, new materials will be added to the AE Evaporator or the PVD-75.
Procedure for requesting a new material
Get the Material Approved
- Create a request using the New PVD Material Request Form.
- Create a helpdesk ticket to inform LNF staff of your request, and to provide us with a forum to communicate with you.
- Your request will be reviewed by the LNF management and staff.
- This process can; in some cases, take up to a month to complete.
- Even if you have other materials approved, you must complete a New PVD Material Request form for every new material you bring into the lab.
Ordering the Material and any Private Shielding or Crucibles
- Once the material is approved, LNF staff will get you the information on target dimensions and any source requirements.
- In order to support this high standard of process dependability, we require that all sources used in the sputter systems below in impurities. Purity set related terms used in the metals market is, “nines”. In the case of LNF, we require materials to have a purity value of 99.995% or greater. This is often described as, “Four Nines Five” and typically written as “4N5”. In cases where 4N5 materials are not available, contact an LNF staff to discuss your options.
- Users requesting new sputter materials will need to buy dedicated shielding for the material.
- New evaporation material requests may be requested to buy a dedicated crucible for the material.
See the Requesting a new material tutorial for specifics.
Due to issues of cross-contamination, process development of co-sputtered films will require the purchase of private targets and shields.
Superuser access provides access to
- Target change
- Modify and run VP (variable parameter) recipes
- Create and support private recipes
- Support and train colleagues
- Custom film development
- Reactive sputtering
- Heated recipes (up to 350°C)
- Co-Sputtered films
- Applied bias voltages
- All privately supported materials in the LNF are developer supported
- Storage, cleaning, burn-in, and recipe development is the responsibility of the owner
- The LNF in collaboration with OSEH can assist with the disposal of these materials
- Each material requires a designated shield for processing.
- This is to prevent cross-contamination, and provide a more reliable maintenance schedule
- Storage and cleaning is the responsibility of the developer.