Difference between revisions of "LNF Sputter Adding New Films"

From LNF Wiki
Jump to navigation Jump to search
Line 28: Line 28:
  
 
*These sources are in the Lab 18's. Each material require a designated source shield for operation.
 
*These sources are in the Lab 18's. Each material require a designated source shield for operation.
 +
 +
{| class="wikitable" border="1"
 +
|-
 +
! TORUS Source Model
 +
! Target Diameter
 +
! Thickness (Non-Magnetic)
 +
! Thickness (Ferromagnetic Materials)
 +
|-
 +
| TORUS 3
 +
(Model TRS3 & TM03)
 +
| 3" +/-0.020"
 +
| 0.050"- 0.255"
 +
|Fe: 0.08" Max (HSMA**)
 +
Co: 0.125" Max (HSMA**)
 +
Ni: 0.125" (SMA***) or 0.250" Max (HSMA**)
 +
|-
 +
 +
TORUS 3
 +
(Model TRS3 & TM03)
  
 
===TORUS® Mag Keeper™===
 
===TORUS® Mag Keeper™===

Revision as of 12:48, 23 February 2017

Back to Lab 18-1

Back to Lab 18-2

Back to PVD 75

The Lab 18's have two access categories, user and superuser. User level access allows access to the standard recipes where as superuser access allows users to change targets, run variable parameter recipe and create private recipes.

Requesting new materials

The functionality of this program... Helps promote research

  • Create a request using the New Sputter Material Request Form.
  • Create a helpdesk ticket to inform LNF staff of your request and to provide them with a forum to communicate with you.
  • Your request will be reviewed by the LNF management and staff.


See the Requesting a new material tutorial for specifics.

Source Requirements

Private and Co-Sputtering at the LNF

Sputter Targets Technical Notes

TORUS® Circular HV (High Vacuum) Magnetron Sputtering Sources

TORUS® Magnetron Sputtering Sources

  • These sources are in the Lab 18's. Each material require a designated source shield for operation.
TORUS 3 (Model TRS3 & TM03)

TORUS® Mag Keeper™

Mag Keeper

  • These sources are in the PVD 75. Each material require a designated source shield for operation.

Superuser access provides access to:

  • Target change
  • Modify and run VP (variable parameter) recipes
  • Create and support private recipes
  • Support and train colleagues
  • Custom film development
    • Reactive sputtering
    • Heated recipes (up to 350°C)
    • Co-Sputtered films
    • Applied bias voltages

Support

All training and checkout should be managed via the LNF helpdesk.

Superuser Training is required
TORUS Source Model Target Diameter Thickness (Non-Magnetic) Thickness (Ferromagnetic Materials)
TORUS 3

(Model TRS3 & TM03)

3" +/-0.020" 0.050"- 0.255" Fe: 0.08" Max (HSMA**)

Co: 0.125" Max (HSMA**) Ni: 0.125" (SMA***) or 0.250" Max (HSMA**)