Difference between revisions of "Nanoquest II Ion Mill"

From LNF Wiki
Jump to navigation Jump to search
(Created page with "<!-- Set the resource ID, 5 digit # found on the scheduler --> {{#vardefine:toolid|15001}} <!-- Set the Process Technology (see subcategories on Equipment page) --> {{#vard...")
 
Line 25: Line 25:
  
 
==Announcements==
 
==Announcements==
*Update this with announcements as necessary
+
{{note|Currently, use of this tool is restricted to users with high priority deadlines and who are assisting with etch rate characterization. If you believe your process falls into these categories, please create a helpdesk ticket. There will be extensive initial training and practice due to the limited documentation currently published for the tool.|error}}
  
 
==Capabilities==
 
==Capabilities==
Line 62: Line 62:
 
==Standard operating procedure==
 
==Standard operating procedure==
 
<!-- To include a document from google docs, use the line below, replace "googledocid" with the ID for the document. Remember, to make this visible, you must set Sharing for the document to "Anyone with the link can view". -->
 
<!-- To include a document from google docs, use the line below, replace "googledocid" with the ID for the document. Remember, to make this visible, you must set Sharing for the document to "Anyone with the link can view". -->
{{#widget:GoogleDoc|key=googledocid}}
+
{{#widget:GoogleDoc|key=1uEOe2y17LWWYWknJb8xiF6oAEcbNvh-lalyo69wzpao}}
  
 
==Checkout procedure==
 
==Checkout procedure==
<!-- Describe the checkout procedure for the tool. For example: -->
+
Please create a helpdesk ticket if you have an urgent, high priority need for the tool and include as much process information as possible. A staff member will contact you regarding your process and schedule.
 +
<!-- Describe the checkout procedure for the tool. For example:
 
# Read through this page and the Standard Operating Procedure above.
 
# Read through this page and the Standard Operating Procedure above.
 
# Complete the training request form [http://examplelink.com here].
 
# Complete the training request form [http://examplelink.com here].
Line 73: Line 74:
 
# Complete the SOP quiz [http://examplelink.com here].
 
# Complete the SOP quiz [http://examplelink.com here].
 
# Schedule a checkout session with a tool engineer via the helpdesk ticket system. If this checkout is successful, the engineer will authorize you on the tool.
 
# Schedule a checkout session with a tool engineer via the helpdesk ticket system. If this checkout is successful, the engineer will authorize you on the tool.
 +
-->
  
 
==Maintenance==  
 
==Maintenance==  

Revision as of 11:11, 13 January 2020

Nanoquest II Ion Mill
Equipment Details
Technology Ion milling
Materials Restriction Metals
Equipment Manual
Overview System Overview
Operating Procedure SOP
Supported Processes Supported Processes
User Processes User Processes
Maintenance Maintenance


Warning Warning: This page has not been released yet.

The Nanoquest II Ion Mill is a...

Announcements

Currently, use of this tool is restricted to users with high priority deadlines and who are assisting with etch rate characterization. If you believe your process falls into these categories, please create a helpdesk ticket. There will be extensive initial training and practice due to the limited documentation currently published for the tool.

Capabilities

  • Etch Rate
  • Resolution
  • Aspect Ratio
  • Thickness range

System overview

Hardware details

  • Gases
  • Pressure
  • Chuck
  • Chamber
  • RF / Power Specs
  • Chemicals

Substrate requirements

  • Wafer Size
  • Wafer type
  • Any mounting?
  • Wafer thickness

Material restrictions

The Nanoquest II Ion Mill is designated as a Metals class tool. Below is a list of approved materials for the tool. Approved means the material is allowed in the tool under normal circumstances. If a material is not listed, please create a helpdesk ticket or email info@lnf.umich.edu for any material requests or questions.


Supported processes

There are several processes for this tool supported by the LNF, which are described in more detail on the Processes page.

In addition to these, this tool has a number of user-created recipes for etching a wide variety of materials. Some of these recipes are documented on Nanoquest II Ion Mill user processes. If you are curious if your material can be processed in this tool, please contact the tool engineers via the helpdesk ticket system.

Standard operating procedure

Widget text will go here.

Checkout procedure

Please create a helpdesk ticket if you have an urgent, high priority need for the tool and include as much process information as possible. A staff member will contact you regarding your process and schedule.

Maintenance

Process name