Difference between revisions of "PDMS"
|Line 30:||Line 30:|
[https://www.youtube.com/watch?v=zWQTnH79l_8 How to
[https://www.youtube.com/watch?v=zWQTnH79l_8 How to PDMS]
Revision as of 16:08, 1 April 2020
|Warning:||This page has not been released......|
Polydimethylsiloxane (PDMS) belongs to a group of polymeric organo-silicon compounds that are commonly referred to as silicones. PDMS is non-toxic, optically clear, bio compatible, flexible and chemically stable. The PDMS chemical structure can be represented as:
PDMS can be synthesized with a variety of end groups suitable for a wide variety of applications. The PDMS used in soft lithography, in particular, is methyl group terminated. In addition the base polymer is available in different molecular weights and viscosities. LNF stocks Sylgard 184 (from Dupont Corp.) which has a viscosity in the 4000 - 6500 cSt.
At LNF PDMS can be dried etched in the Plasmatherm 790 [Plasmatherm 790]
PDMS is usually patterned by molding or soft lithography. Its chemical innertness, makes it difficult to wet etch and dry etch. Usually the dry etch of PDMS yields rough surfaces and in most of the cases residue. Several pares have been written about a combination of dry and wet etching 
Technical Data Sheet