|Warning:||This page has not been released yet.|
PMMA is a positive e-beam lithography resist from MicroChem. The LNF offers the 950 series in several viscosities.
PMMA processes vary depending on the design requirements. A few examples that work for many situations are listed below. For assistance characterizing a PMMA process, please create a helpdesk ticket.
- There are currently no process SOPs defined for this chemical.
PMMA spinning and baking should be performed in the E-Beam Spinner/Hot-Plate Bench. Exposure is done with the JEOL E-Beam. Development is done at the E-Beam Solvent Bench.
|PMMA A4 4krpm||200||What's it good for?|
|row 2, cell 1||row 2, cell 2||row 2, cell 3|
Technical Data Sheet
Safety Data Sheet
- There are currently no Safety Data Sheets (SDSes) for this chemical.