Difference between revisions of "Plasmatherm 790/Processes/m pary1"
< Plasmatherm 790 | Processes
Jump to navigation
Jump to search
| Line 62: | Line 62: | ||
Then occasionally the recipe is tested on other materials as shown below. | Then occasionally the recipe is tested on other materials as shown below. | ||
{{#widget:Iframe | {{#widget:Iframe | ||
| − | |url=https://docs.google.com/spreadsheets/d/1jDSV00jZ-1vppt2MgGRAJyXRvxEE3rJIlXtngODM9-0/pubchart?oid= | + | |url=https://docs.google.com/spreadsheets/d/1jDSV00jZ-1vppt2MgGRAJyXRvxEE3rJIlXtngODM9-0/pubchart?oid=1556592131&format=interactive |
|width=700 | |width=700 | ||
|height=350 | |height=350 | ||
|border=0 | |border=0 | ||
}} | }} | ||
Revision as of 13:44, 24 February 2015
 Warning: | This page has not been released yet. |
| About this Process | |
|---|---|
| Process Details | |
| Equipment | Plasmatherm 790 |
| Technology | RIE |
| Material | Parylene |
| Mask Materials | Photoresist |
| Gases Used | O2 |
m_pary1 is an O2 etch that can be used for parylene and other polymers.
Contents
Parameters
| Parameter | Etch |
|---|---|
| RF Power | 105 W |
| Pressure | 100 mTorr |
| O2 Flow | 99 sccm |
Capabilities
Etch Rate
Mask Selectivity
Sidewall Profile
- Undercut: XXX
Limitations
????
Qualification
Once a month m_pary1 is run on a XXX. This etch rate is reported in the chart below.
Then occasionally the recipe is tested on other materials as shown below.
