Template:Convert/list of units
The table below lists units supported by template {{convert}}. The list is not complete—more complete lists are linked for each dimension. A complete list is at the full list of units.
- Explanation - unit codes
The {{convert}} template uses unit-codes, which are similar to (but not necessarily exactly the same as) the usual written abbreviation for a given unit. These 'unit-codes' are given in column 3 of the following tables, and are accepted as input by the {{convert}} template as the second and third unnamed parameters. For example, {{convert|100|kg|lb}}
produces "100 kilograms (220 lb)" and {{convert|100|lb|kg}}
produces "100 pounds (45 kg)"
Some units have alternative unit-codes; these are shown in brackets in column 3, e.g. °F (F): either may be entered for Fahrenheit (but not lower-case f).
The unit-codes should be treated as case-sensitive, especially in cases like {{convert|100|Mm|mm}}
, which produces "100 megametres (1.0×1011 mm)".
The output of {{convert}} can display multiple converted units, if further unit-codes are specified after the second unnamed parameter (without the | separator). Typical combination output units are listed below in column 7. For example, {{convert|55|nmi|km mi}}
produces "55 nautical miles (102 km; 63 mi)", and {{convert|1|oz|ozt g gr}}
produces "1 ounce (0.91 ozt; 28 g; 440 gr)".
Abridged list of units supported by {{Convert}}
| ||||||
---|---|---|---|---|---|---|
Explanation | ||||||
system | unit | unit- code |
symbol or abbrev. |
notes | sample default conversion |
combination output units |
the system(s) to which the unit belongs | units listed by name | unit-code to use in template | symbols shown in output | other notes about the units | sample of the default conversion for the unit | output codes for multiple conversions
|
AREA (Full list) | ||||||
system | unit | unit- code |
abbrev- iation |
notes | sample default conversion |
combination output units |
SI | square kilometre | km2 | km2 | US spelling: square kilometer |
1.0 km2 (0.39 sq mi) |
|
square metre | m2 | m2 | US spelling: square meter |
1.0 m2 (11 sq ft) |
| |
square centimetre | cm2 | cm2 | US spelling: square centimeter |
1.0 cm2 (0.16 sq in) |
| |
square millimetre | mm2 | mm2 | US spelling: square millimeter |
1.0 mm2 (0.0016 sq in) |
| |
non-SI metric | hectare | ha | ha | 1.0 ha (2.5 acres) | ||
Imperial & US customary |
square mile | sqmi | sq mi | 1.0 sq mi (2.6 km2) |
| |
acre | acre | (none) | 1.0 acre (0.40 ha) | |||
square yard | sqyd | sq yd | 1.0 sq yd (0.84 m2) | |||
square foot | sqft (sqfoot) |
sq ft | long code "sqfoot" outputs square foot (and never feet) | 1.0 sq ft (0.093 m2) |
| |
square inch | sqin | sq in | 1.0 sq in (6.5 cm2) |
| ||
Other | square nautical mile | sqnmi | sq nmi | 1.0 sq nmi (3.4 km2; 1.3 sq mi) | ||
dunam | dunam | (none) | For alternative spellings and definitions see the full list | 1.0 dunam (0.0010 km2; 0.00039 sq mi) | ||
tsubo | tsubo | (none) | 1.0 tsubo (3.3 m2) |
| ||
DENSITY (Full list) | ||||||
system | unit | unit- code |
abbrev- iation |
notes | sample default conversion |
combination output units |
Metric | kilogram per cubic metre | kg/m3 | kg/m3 | 1.0 kg/m3 (1.7 lb/cu yd) |
| |
gram per cubic metre | g/m3 | g/m3 | 1.0 g/m3 (0.0017 lb/cu yd) |
| ||
Imperial & US customary |
pound per cubic foot | lb/ft3 | lb/cu ft | 1.0 lb/cu ft (0.016 g/cm3) |
| |
pound per cubic yard | lb/yd3 | lb/cu yd | 1.0 lb/cu yd (0.59 kg/m3) |
| ||
ENERGY (Full list) | ||||||
system | unit | unit- code |
abbrev- iation |
notes | sample default conversion |
combination output units |
SI | gigajoule | GJ | GJ | 1.0 GJ (280 kWh) | ||
megajoule | MJ | MJ | 1.0 MJ (0.28 kWh) | |||
kilojoule | kJ | kJ | 1.0 kJ (240 cal) | |||
hectojoule | hJ | hJ | 1.0 hJ (24 cal) | |||
decajoule | daJ | daJ | 1.0 daJ (2.4 cal) | |||
joule | J | J | 1.0 J (0.24 cal) | |||
decijoule | dJ | dJ | 1.0 dJ (0.024 cal) | |||
centijoule | cJ | cJ | 1.0 cJ (0.0024 cal) | |||
millijoule | mJ | mJ | 1.0 mJ (0.00024 cal) | |||
microjoule | µJ (uJ) | µJ | 1.0 µJ (2.4×10−7 cal) | |||
nanojoule | nJ | nJ | 1.0 nJ (2.4×10−10 cal) | |||
cgs | megaerg | Merg | Merg | 1.0 Merg (0.10 J) | ||
kiloerg | kerg | kerg | 1.0 kerg (0.10 mJ) | |||
erg | erg | (none) | 1.0 erg (0.10 µJ) | |||
Watt-hour multiples | terawatt-hour | TWh | TWh | 1.0 TWh (3.6 PJ) | ||
TW.h | TW·h | |||||
gigawatt-hour | GWh | GWh | 1.0 GWh (3.6 TJ) | |||
GW.h | GW·h | |||||
megawatt-hour | MWh | MWh | 1.0 MWh (3.6 GJ) | |||
MW.h | MW·h | |||||
kilowatt-hour | kWh | kWh | 1.0 kWh (3.6 MJ) | |||
kW.h | kW·h | |||||
watt-hour | Wh | Wh | 1.0 Wh (3.6 kJ) | |||
W.h | W·h | |||||
Electron- volt multiples | ||||||
gigaelectronvolt | GeV | GeV | 1.0 GeV (0.16 nJ) | |||
megaelectronvolt | MeV | MeV | 1.0 MeV (0.16 pJ) | |||
kiloelectronvolt | keV | keV | 1.0 keV (0.16 fJ) | |||
electronvolt | eV | eV | 1.0 eV (0.16 aJ) | |||
millielectronvolt | meV | meV | 1.0 meV (0.16 zJ) | |||
Calorie multiples | calorie | Cal | Cal | The thermo-chemical calorie is the default definition. For others, see the full list. | 1.0 Cal (4.2 kJ) | |
megacalorie | Mcal | Mcal | 1.0 Mcal (4.2 MJ) | |||
kilocalorie | kcal | kcal | 1.0 kcal (4.2 kJ) | |||
calorie | cal | cal | 1.0 cal (4.2 J) | |||
millicalorie | mcal | mcal | 1.0 mcal (4.2 mJ) | |||
pound/ ounce-foot/ inch-hour-minute-second |
foot-poundal | ftpdl | ft·pdl | 1.0 ft·pdl (0.042 J) | ||
foot-pound force | ftlbf | ft·lbf | 1.0 ft·lbf (1.4 J) | |||
ftlb-f | ft·lbf | |||||
inch-pound force | inlbf | in·lbf | 1.0 in·lbf (110 mJ) | |||
inlb-f | in·lbf | |||||
inch-ounce force | inozf | in·ozf | 1.0 in·ozf (7.1 mJ) | |||
inoz-f | in·ozf | |||||
horsepower-hour | hph | hp·h | 1.0 hp·h (0.75 kWh) | |||
British thermal unit | British thermal unit | Btu | Btu | The International Steam Table British thermal unit is used. For others, see the full list. | 1.0 Btu (1.1 kJ) | |
BTU | BTU | |||||
TNT-based units | gigatonne of TNT | GtTNT | (none) | 1.0 gigatonne of TNT (4.2 EJ) | ||
gigaton of TNT | GtonTNT | (none) | ||||
megatonne of TNT | MtTNT | (none) | 1.0 megatonne of TNT (4.2 PJ) | |||
megaton of TNT | MtonTNT | Mt | ||||
kilotonne of TNT | ktTNT | (none) | 1.0 kilotonne of TNT (4.2 TJ) | |||
kiloton of TNT | ktonTNT | kt | ||||
tonne of TNT | tTNT | (none) | 1.0 tonne of TNT (4.2 GJ) | |||
ton of TNT | tonTNT | (none) | ||||
Other | ||||||
Hartree | Eh | Eh | 1.0 Eh (27 eV) | |||
rydberg | Ry | Ry | 1.0 Ry (14 eV) | |||
tonne of oil equivalent | toe | toe | 1.0 toe (42 GJ) | |||
barrel of oil equivalent | BOE | BOE | 1.0 BOE (6.1 GJ) | |||
cubic foot of natural gas | cuftnaturalgas (cufootnaturalgas) | Unit-code cufootnaturalgas will show "cubic foot of natural gas" if plural. | 1.0 cubic foot of natural gas (1.1 MJ) | |||
litre-atmosphere | latm | l·atm | 1.0 l·atm (100 J) | |||
Latm | L·atm | |||||
imperial gallon-atmosphere | impgalatm | imp gal·atm | 1.0 imp gal·atm (460 J) | |||
US gallon-atmosphere | USgalatm (usgalatm) |
US gal·atm | 1.0 US gal·atm (380 J) | |||
U.S.galatm (usgalatm) |
U.S. gal·atm |
| ||||
FORCE (Full list) | ||||||
system | unit | unit- code |
abbrev- iation |
notes | sample default conversion |
combination output units |
SI | giganewton | GN | GN | Allows triple output units. See: full list. | 1.0 GN (220,000,000 lbf) |
|
meganewton | MN | MN | Allows triple output units. See: full list. | 1.0 MN (220,000 lbf) |
| |
kilonewton | kN | kN | Allows triple output units. See: full list. | 1.0 kN (220 lbf) |
| |
newton | N | N | 1.0 N (0.22 lbf) |
| ||
millinewton | mN | mN | 1.0 mN (0.0036 ozf) |
| ||
micronewton | µN (uN) | µN | 1.0 µN (0.0016 grf) |
| ||
nanonewton | nN | nN | 1.0 nN (1.6×10−6 grf) |
| ||
cgs | megadyne | Mdyn | Mdyn | 1.0 Mdyn (2.2 lbf) | ||
kilodyne | kdyn | kdyn | 1.0 kdyn (0.036 ozf) | |||
dyne | dyn (dyne) |
dyn | 1.0 dyn (0.016 grf) | |||
millidyne | mdyn | mdyn | 1.0 mdyn (1.6×10−5 grf) | |||
Metric gravitational units | tonne-force | t-f | tf | 1.0 tf (9.8 kN; 0.98 LTf; 1.1 STf) | ||
tf | tf | |||||
kilogram-force | kg-f | kgf | 1.0 kgf (9.8 N; 2.2 lbf) | |||
kgf | kgf | |||||
gram-force | g-f | gf | 1.0 gf (9.8 mN; 0.035 ozf) | |||
gf | gf | |||||
milligram-force | mg-f | mgf | 1.0 mgf (9.8 µN; 0.015 grf) | |||
mgf | mgf | |||||
Avoirdupois-based units | poundal | pdl | pdl | 1.0 pdl (0.14 N) | ||
long ton-force | LT-f | LTf | 1.0 LTf (10.0 kN) |
| ||
LTf | long ton-force |
| ||||
short ton-force | ST-f | STf | 1.0 STf (8.9 kN) |
| ||
STf | short ton-force |
| ||||
pound-force | lb-f | lbf | 1.0 lbf (4.4 N) | |||
lbf | lbf | |||||
grain-force | gr-f | grf | 1.0 grf (640 µN) | |||
grf | grf |
| ||||
LENGTH (Full list) | ||||||
system | unit | unit- code |
abbrev- iation |
notes | sample default conversion |
combination output units |
SI | megametre | Mm | Mm | US spelling: megameter |
1.0 Mm (620 mi) | |
kilometre | km | km | US spelling: kilometer |
1.0 km (0.62 mi) |
| |
metre | m | m | US spelling: meter |
1.0 m (3 ft 3 in) |
| |
centimetre | cm | cm | US spelling: centimeter |
1.0 cm (0.39 in) |
| |
millimetre | mm | mm | US spelling: millimeter |
1.0 mm (0.039 in) |
| |
micrometre | µm (um) | µm | US spelling: micrometer |
1.0 µm (3.9×10−5 in) | ||
nanometre | nm | nm | US spelling: nanometer |
1.0 nm (3.9×10−8 in) | ||
non-SI metric | ångström | Å (angstrom) |
Å | 1.0 Å (3.9×10−9 in) | ||
Imperial & US customary |
mile | mi | mi | 1.0 mi (1.6 km) |
| |
furlong | furlong | (none) | 1.0 furlong (660 ft; 200 m) | |||
chain | chain | (none) | 1.0 chain (66 ft; 20 m) | |||
rod | rd | rd | For other names of this unit see the full list. | 1.0 rd (17 ft; 5.0 m) | ||
fathom | fathom | (none) | fathom ≡ 6 ft | 1.0 fathom (6.0 ft; 1.8 m) | ||
yard | yd | yd | assumes the international definition | 1.0 yd (0.91 m) | ||
foot | ft (foot) | ft | long code "foot" outputs foot (and never feet) | 1.0 ft (0.30 m) |
| |
inch | in | in | 1.0 in (25 mm) |
| ||
Other | nautical mile | nmi | nmi | the international standard nautical mile For other nautical miles see the full list. |
1.0 nmi (1.9 km; 1.2 mi) | |
parsec | pc | pc | 1.0 pc (3.3 ly) | |||
light-year | ly | ly | 1.0 ly (63,000 AU) | |||
astronomical unit | AU | AU | 1.0 AU (150,000,000 km; 93,000,000 mi) |
| ||
MASS (Full list) | ||||||
system | unit | unit- code |
abbrev- iation |
notes | sample default conversion |
combination output units |
SI | kilogram | kg | kg | Allows triple output units. See: full list. | 1.0 kg (2.2 lb) |
|
gram | g | g | 1.0 g (0.035 oz) |
| ||
milligram | mg | mg | 1.0 mg (0.015 gr) |
| ||
microgram | µg (ug) | µg | 1.0 µg (1.5×10−5 gr) | |||
non-SI metric | tonne | t | t | Allows triple output units. See: full list. | 1.0 t (0.98 long tons; 1.1 short tons) |
|
metric ton | MT | t |
| |||
Avoirdupois | long ton | LT | (none) | 2,240 lb used mostly in the British Commonwealth. Allows triple output units. See: full list. |
1.0 long ton (1.0 t) |
|
long ton | long ton | |||||
short ton | ST | (none) | 2,000 lb used mostly in the US. Allows triple output units. See: full list. |
1.0 short ton (0.91 t) |
| |
short ton | short ton | |||||
stone | st | st | 14 lb used mostly in the British Commonwealth except Canada. Allows triple output units. See: full list. |
1.0 st (14 lb; 6.4 kg) |
| |
pound | lb | lb | Allows triple output units. See: full list. | 1.0 lb (0.45 kg) |
| |
ounce | oz | oz | 1.0 oz (28 g) |
| ||
drachm | drachm | (none) | 1.0 drachm (1.8 g) | |||
drachm | dram | (none) | ||||
grain | gr | gr | equivalent to the troy grain | 1.0 gr (0.065 g) | ||
Troy | troy ounce | ozt | ozt | 1.0 ozt (1.1 oz; 31 g) | ||
other | carat | carat | (none) | 1.0 carat (0.20 g) |
| |
SPEED (Full list) | ||||||
system | unit | unit- code |
abbrev- iation |
notes | sample default conversion |
combination output units |
SI | metre per second | m/s | m/s | US spelling: meter per second |
1.0 m/s (3.3 ft/s) |
|
non-SI metric | kilometre per hour | km/h | km/h | US spelling: kilometer per hour |
1.0 km/h (0.62 mph) |
|
Imperial & US customary |
mile per hour | mph | mph | 1.0 mph (1.6 km/h) |
| |
foot per second | ft/s (foot/s) | ft/s | long code "foot/s" outputs foot per second (and never feet) | 1.0 ft/s (0.30 m/s) |
| |
Maritime units | knot | kn (knot) | kn | 1.0 kn (1.9 km/h; 1.2 mph) |
| |
TEMPERATURE (Full list) | ||||||
system | unit | unit- code |
abbrev- iation |
notes | sample default conversion |
combination output units |
SI | K | K | K | Allows triple output units. See: full list. | 1.0 K (−272.15 °C; −457.87 °F) |
|
°C | °C (C) | °C | 1.0 °C (33.8 °F) |
| ||
Imperial & US customary |
°R | °R (R) | °R | 1.0 °R (0.556 K; −458.670 °F; −272.594 °C) |
| |
°F | °F (F) | °F | 1.0 °F (−17.2 °C) |
| ||
Celsius change | C-change | Used for temperature intervals instead of actual temperatures Example: {{convert|5|C-change|0}} warmer Result: 5 °C (9 °F) warmer | ||||
Fahrenheit change | F-change | Used for temperature intervals instead of actual temperatures Example: {{convert|10|F-change|0}} colder Result: 10 °F (6 °C) colder
| ||||
TORQUE (Full list) | ||||||
system | unit | unit- code |
abbrev- iation |
notes | sample default conversion |
combination output units |
Industrial | ||||||
SI | newton metre | Nm | N·m | Triple combinations are also possible. See the full list. | 1.0 N·m (0.74 lbf·ft) |
|
Non-SI metric | kilogram metre | kg.m | kg·m | 1.0 kg·m (9.8 N·m; 7.2 lb·ft) |
| |
Imperial & US customary |
pound force-foot | lb.ft | lb·ft | 1.0 lb·ft (1.4 N·m) |
| |
Scientific | ||||||
SI | newton metre | N.m | N·m | Triple combinations are also possible. See the full list. | 1.0 N·m (0.74 lbf·ft) |
|
Non-SI metric | kilogram force-metre | kgf.m | kgf·m | 1.0 kgf·m (9.8 N·m; 7.2 lbf·ft) |
| |
Imperial & US customary |
pound force-foot | lbf.ft | lbf·ft | 1.0 lbf·ft (1.4 N·m) |
| |
VOLUME (Full list) | ||||||
system | unit | unit- code |
abbrev- iation |
notes | sample default conversion |
combination output units |
SI | cubic metre | m3 | m3 | US spelling: cubic meter one kilolitre |
1.0 m3 (35 cu ft) | |
cubic centimetre | cm3 | cm3 | US spelling: cubic centimeter one millilitre |
1.0 cm3 (0.061 cu in) | ||
cc | cc | |||||
cubic millimetre | mm3 | mm3 | US spelling: cubic millimeter |
1.0 mm3 (6.1×10−5 cu in) | ||
non-SI metric | kilolitre | kl | kl | US spelling: kiloliter one cubic metre |
1.0 kl (35 cu ft) | |
kL | kL | |||||
litre | l | l | US spelling: liter one cubic decimetre Allows triple output units. See: full list. |
1.0 l (0.22 imp gal; 0.26 US gal) |
| |
L | L |
| ||||
centilitre | cl | cl | US spelling: centiliter |
1.0 cl (0.35 imp fl oz; 0.34 US fl oz) | ||
cL | cL | |||||
millilitre | ml | ml | US spelling: milliliter one cubic centimetre |
1.0 ml (0.035 imp fl oz; 0.034 US fl oz) |
| |
mL | mL |
| ||||
Imperial & US customary |
cubic yard | cuyd | cu yd | 1.0 cu yd (0.76 m3) | ||
cubic foot | cuft (cufoot) | cu ft | long code "cufoot" outputs cubic foot (and never feet) | 1.0 cu ft (0.028 m3) | ||
cubic inch | cuin | cu in | 1.0 cu in (16 cm3) | |||
Imperial | imperial barrel | impbbl | imp bbl | 36 imp gal | 1.0 imp bbl (160 l; 36 imp gal; 43 US gal) | |
imperial bushel | impbsh | imp bsh | 8 imp gal | 1.0 imp bsh (36 l; 8.0 imp gal; 8.3 US dry gal) | ||
impbu | imp bu | |||||
imperial gallon | impgal | imp gal | 4.54609 litres by definition, also 4 imp qt or 8 imp pt or 160 imp fl oz Allows triple output units. See: full list. |
1.0 imp gal (4.5 l; 1.2 US gal) |
| |
imperial quart | impqt | imp qt | 1/4 imp gal or 40 imp fl oz | 1.0 imp qt (1,100 ml; 38 US fl oz) | ||
imperial pint | imppt | imp pt | 1/8 imp gal or 20 imp fl oz | 1.0 imp pt (0.57 l) | ||
imperial fluid ounce | impoz (impfloz) | imp fl oz | 1/160 imp gal | 1.0 imp fl oz (28 ml; 0.96 US fl oz) |
| |
US customary liquid measure |
US barrel | USbbl | US bbl | 31½ US gal used for liquids except for oil and beer (see the full list) |
1.0 US bbl (120 l; 32 US gal; 26 imp gal) | |
U.S.bbl | U.S. bbl | |||||
barrel | oilbbl | bbl | 42 US gal | 1.0 bbl (0.16 m3) | ||
US beer barrel | USbeerbbl (usbeerbbl) |
US bbl | 1.0 US bbl (120 l; 31 US gal; 26 imp gal) | |||
U.S.beerbbl (usbeerbbl) |
U.S. bbl | |||||
US gallon | USgal | US gal | 231 cubic inches by definition, also 4 US qt or 8 US pt or 128 US fl oz Allows triple output units. See: full list. |
1.0 US gal (3.8 l; 0.83 imp gal) |
| |
U.S.gal | U.S. gal |
| ||||
US quart | USqt | US qt | 1/4 US gal or 32 US fl oz | 1.0 US qt (950 ml) | ||
U.S.qt | U.S. qt | |||||
US pint | USpt | US pt | 1/8 US gal or 16 US fl oz | 1.0 US pt (0.47 l; 0.83 imp pt) | ||
U.S.pt | U.S. pt | |||||
US fluid ounce | USoz (USfloz) |
US fl oz | 1/128 US gal | 1.0 US fl oz (30 ml) |
| |
U.S.oz (U.S.floz) |
U.S. fl oz |
| ||||
US customary dry measure |
US dry barrel | USdrybbl | US dry bbl | 105/32 US bsh | 1.0 US dry bbl (0.12 m3) | |
U.S.drybbl | U.S. dry bbl | |||||
US bushel | USbsh | US bsh | 2150.42 cubic inches by definition | 1.0 US bsh (35 l; 8.0 US dry gal; 7.8 imp gal) | ||
U.S.bsh | U.S. bsh | |||||
US bushel | USbu | US bu | 2150.42 cubic inches by definition | 1.0 US bu (35 l; 8.0 US dry gal; 7.8 imp gal) | ||
U.S.bu | U.S. bu | |||||
US dry gallon | USdrygal | US dry gal | 1/8 US bsh Allows triple output units. See: full list. |
1.0 US dry gal (4.4 l) |
| |
U.S.drygal | U.S. dry gal |
| ||||
US dry quart | USdryqt | US dry qt | 1/32 US bsh | 1.0 US dry qt (1,100 ml) | ||
U.S.dryqt | U.S. dry qt | |||||
US dry pint | USdrypt | US dry pt | 1/32 US bsh | 1.0 US dry pt (550 ml) | ||
U.S.drypt | U.S. dry pt |
| ||||
PRESSURE | ||||||
unit | unit- code |
abbrev- iation |
sample default conversion |
|||
gigapascal | GPa | GPa | 1.0 GPa (150,000 psi) | |||
megapascal | MPa | MPa | 1.0 MPa (150 psi) | |||
kilopascal | kPa | kPa | 1.0 kPa (0.15 psi) | |||
hectopascal | hPa | hPa | 1.0 hPa (0.015 psi) | |||
pascal | Pa | Pa | 1.0 Pa (0.00015 psi) | |||
millipascal | mPa | mPa | 1.0 mPa (1.5×10−7 psi) | |||
millibar | mbar | mbar | 1.0 mbar (1.0 hPa) | |||
mb | mb | |||||
decibar | dbar | dbar | 1.0 dbar (10 kPa) | |||
bar | bar | (none) | 1.0 bar (100 kPa) | |||
kilobarye | kBa | kBa | 1.0 kBa (1.0 hPa) | |||
barye | Ba | Ba | 1.0 Ba (0.10 Pa) | |||
standard atmosphere | atm | atm | 1.0 atm (100 kPa) | |||
torr | Torr | Torr | 1.0 Torr (0.13 kPa) | |||
millimetre of mercury | mmHg | mmHg | 1.0 mmHg (0.13 kPa) | |||
inch of mercury | inHg | inHg | 1.0 inHg (3.4 kPa) | |||
pound per square inch | psi | psi | 1.0 psi (6.9 kPa) | |||
FUEL EFFICIENCY | ||||||
unit | unit- code |
notes | combinations | |||
kilometres per litre | km/l (km/L) | Use km/L to get "km/L"
|
| |||
litres per 100 kilometres | l/100 km (L/100 km) | Use L/100 km to get "L/100 km"
|
| |||
litres per kilometre | l/km (L/km) | Use L/km to get "L/km"
|
| |||
miles per imperial gallon | mpgimp |
| ||||
miles per US gallon | mpgus (mpgUS, mpgU.S.) | Use mpgUS to get "US"Use |
| |||
imperial gallons per mile | impgal/mi |
| ||||
US gallons per mile | usgal/mi (USgal/mi, U.S.gal/mi) | As above with the us vs US vs U.S.
|
| |||
The mpgUS , mpgU.S. , USgal/mi vs U.S.gal/mi , km/L , L/100 km and L/km variants work within combinations also (making 36 combinations in total).
| ||||||
POWER | ||||||
Watts, kilowatts, milliwatts, etc. are supported. As is horsepower (English & metric). Use standard abbreviations as input code (lowercase hp for horsepower, for example) | ||||||
POPULATION DENSITY | ||||||
unit | unit- code |
notes | combinations | |||
inhabitants per square kilometre | PD/sqkm | PD stands for population density, i.e. humans (inhabitants)
|
| |||
per square kilometre | /sqkm | Used when the word 'inhabitants' would be inappropriate. |
| |||
inhabitants per hectare | PD/ha |
| ||||
per hectare | /ha |
| ||||
inhabitants per square mile | PD/sqmi | PD stands for population density, i.e. humans (inhabitants)
|
| |||
per square mile | /sqmi | Used when the word 'inhabitants' would be inappropriate. |
| |||
inhabitants per acre | PD/acre |
| ||||
per acre | /acre |
| ||||
COST PER UNIT MASS | ||||||
unit | unit- code |
notes | combinations | |||
dollars per pound | $/lb | "$" can mean US$, HK$, etc. |
| |||
dollars per kilogram | $/kg |
| ||||
dollars per troy ounce | $/ozt | 12 troy ounces in 1 troy pound |
| |||
|